New X Joints!!

chemgoddess1 started this discussion · 11/15/2011

I just wanted to inform people that XPole has released new X Joints. They are a bit longer than the originals and also have a hex adjustable center pin. These were designed mostly for heavy use poles (studios, competions, people like Shadow) but for the main X Joint I think they would be beneficial for just about anyone. I am not sure if they are on their site. I just got 8 new ones to replace the ones we have in the studio and heard about them when I called.

17 replies

JeHanne · 11/15/2011
Hmmm... would really like to hear more about those. I have 2 Xpoles that could use some better joint technologies. Thanks for sharing! Let us know how they work out for you when you get them installed.
aliceBheartless · 11/15/2011
ooooooo, exciting! I definitely want to hear about how these compare to the older xjoints!
Mechie · 11/15/2011
Anyone know the price of these new joints??
Dancing Paws · 11/16/2011
Yeah, how much?
chemgoddess1 · 11/16/2011
I think they are about $20? I am going to upload some pics to my profile of them.
tarah · 11/16/2011
wow that's great news 🥂 and the price is not bad at all.
Mechie · 11/17/2011
Wow, really? Only $20? I'm guessing this fits all the pole with XJoints and not just the new pole??
chemgoddess1 · 11/17/2011
What is the new pole? I am not sure if they make this in a 45 or not. Here are the pics: https://www.studioveena.com/photos/view_album/4ec41a4d-0d04-48e4-91ba-7f6d0ac37250
amy · 11/17/2011
Chem, they improved the joints for the 45mm the same way, we have some =)
aliceBheartless · 11/17/2011
So has the new joint corrected the problems the joints were having with turning inside the pole?
amy · 11/17/2011
i believe yes-- the thicker walls of the hex screw (rather than the thin walls of the pin) are much sturdier and don't get depressed.... so i can't really see how they will turn unless the walls of the pole itself get bent out of shape, allowing the pin to turn. if that makes sense.
chemgoddess1 · 11/17/2011
The spinning problem is 2 fold: not lining the pole up properly in the first place and not tightening the joint properly. I know that some of our joints got messed up because when putting B pole on top of the joint the holes were not lined up and poeple just spun the pole around to get them to line up instead of lifting and spinning the pole. The other problem was not cranking the crap out of the joint. Yes...you have to seriously put all of your weight into tightening them...a "just tight" WILL NOT WORK and will cause problems. Even on the joints that we had with retracted pins we were able to use without them spinning. I know quite a few people (me including) that got screwdriver handles because allen keys are such a pain to use, but a screwdriver handle with a hex bit will not give you enough torque necessary to tighten these properly. The new design I beleive is a screw pin so there is a possibility that with time vibrations may cause it to push in a bit. I have not taken one of the new ones apart to see exactly how it is constructed (yet). And come on Amy.....you know you have done that same thing!
aliceBheartless · 11/17/2011
Chem, thanks so much for the info... I have been wanting to buy a new pole, and since I needed a multipiece pole, I wanted to go with Xpole, but have been really kind of nervous about the things I had been hearing about the xjoints. I think I just might put it on the Christmas List now. :)
X Pole Rep · 11/17/2011
Hi Guys! X-Pole now carries the 250mm X-Joint (10 inches). This is our longest X-Joint which minimizes flex when setting up the poles up at higher heights. The 250mm X-Joint is heavy duty and perfect for studio use. Retail price is $19.99. To all X-Pole dealers, your regular special pricing will apply. Please call us at 888-976-5387 if you'd like to order!
chemgoddess1 · 11/17/2011
Thank you Lindsey!!
amy · 11/18/2011
Like. =)
Angel1201 · 11/19/2011
Ooh, sounds great!!