Converting a 50mm X Pole to 45mm?
traciitaylor8224 started this discussion ·
Can this be done by purchasing separate 45mm pieces while using teh 50mm base pieces?
6 replies
Sign in or create a free account to reply.
traciitaylor8224 started this discussion ·
Can this be done by purchasing separate 45mm pieces while using teh 50mm base pieces?
Sign in or create a free account to reply.
It will depend on which type of X-Pole you have and its age but yes it is possible. The parts you will need will depend on which pole you have. Old XP (Screw together joints) We do have the majority of parts required but due to its age we would strongly recommend to buy a new pole. Sport It is possible but you will need more parts than makes cost effective sense (only really the base can be kept) and so a new pole would be better. XX (Xpert) Yes this can be done easily - you will need poles tubes and extension, joints and a top insert. The base and Upper done, carry cases, tools etc. can be kept. All these parts are continuously stocked at most X-Pole distribution center's but parts do go in and out of stock depending on demand. When upgrading the XX it is very useful to supply the serial number, that is the small white label on the upper dome with an Alpha numeric code. Please cannot your local X-Pol office for any assistance. X-Pole Tech Team
Bah, I have one of the older models.
Do it really matter the mm size of the pole.. i have a 50mm
I'm petite so, I have small hands. I'd get a better grip on a smaller diameter.
Even if you have one of the older models 45mm (1.75") parts can still be supplied depending on stock at your local X-Pole distributor. Please call them. Their contact information can be found on the USA or UK web site. X-Pole Tech Team
Thank you. I'm just going to put use this one until I sell it & get a 40mm.
