-
Buying a Pole.. advice?
-
Since you say the pin is in the base of the pole, do you mean the top part since you switched it around?
Also, do you have a preference for the SS or brass from PS? Any feedback on how good the friction mount is, and how often you need to adjust?
-
I think I'm leaning towards the PS pole. There was someone on here that was selling a LM rotating pole but my basement ceiling isn't 8 ft so I don't think I can make it work.
The promo code that Erica provided didn't work on the website though. I'll have to double check with her to make sure it's correct. Also, since this is a friction mount, does it need to be mounted on a joist? The website made it seem as if it only needs to be mounted on a joist if it's a semi permanent or permanent pole.
-
It won't work with the pole that's on sale because our system is set up to not combine coupons.
But give us a call and we can manually do it for you. 🙂
1-866-85-POLES or 949-574-7133
Thanks,
Erica
-
abonavo- the pole and the top and bottom are 3 separate pieces. Basically all Sensual did was flip the pole…the bottom piece and top dome are still in teh same location. It is in teh bottom base piece that the pin is in to make it static/spin.
-
What Chemmie said. You can look at the rest of the pix in my PS pole album and see that the adapters on the top and bottom of the pole are the same, so either one will fit in either the base or the ceiling plate. Both adapters have the hole for placing the pin in.
I personally like brass, but that is because I run on the dry side and have grip issues. It is also very dry in Oregon (despite all the rain) so gripping stainless steel is much harder in a dryer climate.
If you like stainless steel and have no grip issues with it, then it is a great metal for spins and can be good for tricks once the pole is really warm. Brass is really amazing for tricks, it warms up really quickly, and I can do spins on it pretty well, although it can give some major pole burn on my hands and wrist.
The friction mount on the PS pole is really good. I think it is much sturdier than my x pole. The PS plate and base have the silicone on the entire bottom, while the xpole only had a small ring. I had my x pole slip on me before; my PS pole has not slipped yet! 🙂 I haven't had to adjust my pole since I put it up (I think it was a few months ago..I should probably take it down and let my ceiling settle…) Yes, the pole needs to go on a joist. Any of these poles will need to go on a joist. That is the only way they will be sturdy enough to support your weight. If they don't, they will pop right through the drywall.
Lilmynx CAN make a pole shorter than 8 feet. Call them and talk to them about it. I believe there is an option on the checkout where you type in your exact ceiling height.
-
Will flipping the pole to be top loading work with a one piece pole instead of the multi piece?
-
I only have the one piece, so yes. It can be done with a multi too, but you need a special adapter (as I am told.)
-
Nevermind, your pictures really helped! It sounds like you have a one piece pole and were able to flip it.
I know LM makes shorter poles, but there was someone that was selling a used one for cheaper but it’s an 8 ft.
I still think I like the PS poles. I’m probably going to bite the bullet and order one and pay the extra $100 than i was planning to spend.
-
You'll love it. The 1 piece is an awesome pole! You won't have to deal with joints ar anything. It's easy to put up and everything. I'm excited for their 38mm to come out!
-
I don’t know if anyone knows, but I was going to call PS tomorrow and figured I’d ask here first since everyone has been so helpful!
On the extreme one piece pole, it says that it’s made for your ceiling height but adjusts up to 6″. So if my ceiling measures 91 inches, and that is the size pole I request, does that mean it will adjust up to 97″? Because it also says that extensions can’t be added to make the pole taller so I’m confused.
-
The pole part itself will be shorter than 91 inches. You have to have room to be able to tilt the pole into place when you are installing it. This also gives you room to make the pole tight when you install it.
-
@abonavo2 – We ask that you measure you're exact ceiling height but the pole does allow for 6 inches of adjustment in case you're "off" a tiny bit in your measurement. We ask that you measure as accurately as possible since the one-piece poles are custom fit for your ceiling but the pole will allow for 6 inches of height adjustment.
The adjustment comes from the 6 in screw thread that is used to ensure the pole fits securely and is properly pressure mounted. This helps for mismeasurement due to padding in carpet, flucuation due to weather and to ensure the tightest fit.
Let me know if there's any other questions that I can answer. 🙂
– Erica
-
This is great information–Thanks!
My concern now is that I will be moving within a year. I know most ceiling heights are 8 ft, or maybe 7'11 when actually measured. If this pole adjusts, will there be a possibility that it will work with an actual 8 ft ceiling or is there no way?
-
I should clarify that my ceiling is 91 inches in the place I’m at now.
-
You should call their customer service and ask them.
Log in to reply.